MIL-PRF-46103E
Surfaces to be bonded shall be properly prepared in a manner which will insure a
proper bond capable of meeting the applicable performance requirements specified
in 3.4. The required adhesive shall be applied uniformly over the entire contact
areas of the components to be joined. When bonding components, uniform pressure
shall be applied over the entire surface area in order to obtain intimate
contact of all components.
3.4
Operating requirements.
3.4.1 V50 ballistic limit protection. The V50 ballistic limit protection, as
defined by MIL-STD-662, shall be the following for the types and classes of
armor:
Type I,
Class 1
- Not less than 3100 ft (945 m) per second against 5.56 mm
M855 lead ball with steel tip projectiles at zero degrees
obliquity.
Type II,
Class 1
- Not less than 2850 ft (869 m) per second against 7.62 mm
(0.30 caliber) lead or mild steel core ball projectile at
zero degrees obliquity.
Type II,
Class 2
- Not less than 2850 ft (869 m) per second against 7.62 mm
(0.30 caliber) hard steel core armor piercing (AP)
projectile at zero degrees obliquity.
Type II,
Class 3
- Not less than 4000 ft (1219 m) per second against 7.62 mm
(0.30 caliber) heavy density core sabot launched armor
piercing (SLAP) projectile at zero degrees obliquity.
Type III, Class 1A - Not less than 1600 ft (487 m) per second against 12.7 mm
(0.50 caliber) mild steel core ball projectile at 1000
meters range at zero degrees obliquity.
Type III, Class 1B - Not less than 2000 ft (610 m) per second against 12.7 mm
(0.50 caliber) mild steel core ball projectile at 500
meters range at zero degrees obliquity.
Type III, Class 1C - Not less than 2850 ft (869 m) per second against 12.7 mm
(0.50 caliber) mild steel core ball projectile at zero
degrees obliquity.
Type III, Class 2A - Not less than 1600 ft (487 m) per second against 12.7 mm
(0.50 caliber) hard steel core armor piercing (AP)
projectile at 1000 meters range at zero degrees obliquity.
Type III, Class 2B - Not less than 2000 ft (610 m) per second against 12.7 mm
(0.50 caliber) hard steel core armor piercing (AP)
projectile at 500 meters range at zero degrees obliquity.
Type III, Class 2C - Not less than 2850 ft (869 m) per second against 12.7 mm
(0.50 caliber) hard steel core armor piercing (AP)
projectile at zero degrees obliquity.
Type III, Class 3
- Not less than 4000 ft (1219 m) per second against 12.7 mm
(0.50 caliber) heavy density core sabot launched armor
piercing (SLAP) projectile at zero degrees obliquity.
4
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business