MIL-PRF-46197A
2.3 Non-Government publications . The following document forms a part of this
document to the extent specified herein. Unless otherwise specified, the
issues of the documents which are DoD adopted are those listed in the issue of
the DoDISS cited in the solicitation. Unless otherwise specified, the issues
of documents not listed in the DoDISS are the issues of the documents cited in
the solicitation (see 6.2).
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM D638
Standard Test Method for Tensile Properties of Plastics
ASTM D695
Standard Test Method for Compressive Properties of
Rigid Plastics
ASTM D790
Standard Test Methods for Flexural Properties of
Unreinforced and Reinforced Plastics and Electrical
Insulating Materials
ASTM D792
Standard Test Methods for Density and Specific Gravity
(Relative Density) of Plastics by Displacement
ASTM D2343
Standard Test Method for Tensile Properties of Glass
Fiber Strands, Yarns, and Rovings Used in Reinforced
Plastics
ASTM D2344
Standard Test Method for Apparent Interlaminar Shear
Strength of Parallel Fiber Composites by Short-Beam
Method
ASTM D2584
Standard Test Method for Ignition Loss of Cured
Reinforced Resins
ASTM D4065
Standard Practice for Determining and Reporting Dynamic
Mechanical Properties of Plastics
ASTM E537
Standard Test Method for Assessing the Thermal
Stability of Chemicals by Methods of Differential Thermal
Analysis
(Application for copies should be addressed to the American Society for
Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428).
2.4 Order of precedence . In the event of a conflict between the text of this
document and the references cited herein, the text of this document takes
precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article . When specified (see 6.2), a sample shall be subjected to
first article inspection in accordance with paragraph 4.2.1.
3.2
Composition . The high strength glass woven roving shall be impregnated
with a resin that has been formulated in such a manner as to yield material
that meets the requirements of this specification.
2
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business